Torofy Blog

Depression and Heart Disease

dbrand skins for iPhone 6s Plus Review


Hi everyone, Aaron here for zollotech and this is my iPhone 6S+, and this is a dbrand skin. Dbrand was nice enough to send this along, and I thought I’d make this video because a lot of you asked what skin I had on my 6+ and I did a separate video for dbrand, and it was a little more artsy and I thought I’d show you how this actually goes on and what it’s like to install and show you what it looks like. This is the matte black option. I really like this option and then they send you a couple different options with it. So, you’ve got this one skin – this is the one I’m gonna use and what it does is it covers right here And then they give you the top and bottom and you can either just cover this portion or have the wraparound skins. And then we have full protection here, if you wanna use this. So you can screw this up a couple times and you’ve got a couple extras there Or you can use these and that’s what I’m gonna use is this skin and these top two which I like the look of that the most. This adds a little bit of grip and this is the matte black and they have carbon fiber and different looks such as natural wood and all sorts of things. This particular variant comes in, I think, around $10-15 plus shipping. So it’s pretty inexpensive. They all use 3M material, and it sticks really well. My previous one stayed on a long time. So what you need is a couple simple things – they actually include a little microfiber cloth to clean off any grease or debris on the back. I’ve already done that using a different cloth, but they include this with it. And what you do is just wipe the device down make sure your hands are clean before you install this – you want to get all the oil off that you can. And then you just start installing it on the back. And I’ll put this under the screen just to protect it a little bit better as it slides around a little bit. The other thing you’ll need is a hairdryer and that helps you get this around the corners. So the first thing we’re gonna do is put this piece on and then we’ll move to the hairdryer. So you just peel this back and it can take some time to do and you can see there’s a little crosshatch here I don’t know if you can see that, but there’s a little crosshatch in there and that allows air to escape. And what we’ll do is place this like this Real simply And we’ll line up the Apple And you wanna make sure you have bright light And you can just peel it off like this Make sure you have really bright light when you’re doing this. I have this part all aligned, so I’m just gonna pull this piece back and bring it down and you’re gonna push from the center out when you start to smooth Now we’re not gonna do the sides yet – we’re gonna heat those up before we do that So we’re just gonna push out from the center, get everything kind of aligned and set up right. And then we’re gonna move on to the sides So we’re gonna heat this side up using a hairdryer next. I’ve got my hairdryer here. I’m just gonna put it on low, heat the side up, and then we’ll work it around. The side’s heated up a little bit, so we’re just gonna push from the center out fold it around the buttons and make sure it’s right And if you’ve got it right, they should fit just about as perfect as you can get. That’s this side is done, and I’m just gonna run my thumbnail down here to kind of smooth everything out Make sure it’s nice and stuck there And you can see down the side here – everything looks really nice I’m gonna move over to the other side now. I have this side heated up so now I’m just gonna work it over just like I did the other one And you can see it’s about as perfect as you can get I’m gonna make sure both sides are like that down the sides here Make sure the skin is smoothed out and stuck nice and complete And then we’ll work on the back pieces as well. Now that I have the sides wrapped around, I’m gonna move on to the top and bottom pieces. Now, like I said before, you can choose from these pieces that I’m going to use or these bottom pieces that fully wrap around. I kind of like these, and they take a little bit more time to install properly but they look really nice when they’re done. If you look at the bottom of my phone, it’s actually scuffed just from setting it down and then the top part where the camera is is scuffed just from setting it The lens is okay, but everything else is getting a little bit of wear so this will help protect that and keep that from happening. So let’s move on and put these on I’ll start with the bottom one – it’s a little bit easier to install And, just, you wanna take your time doing this. The skin has been fully applied to the back It looks really good, and you can see everything is cut perfectly If I bring this up here, you’ll see around the camera, around the microphone and the flash And just around these antenna lines, everything looks really, really nice And if you want a little bit more protection, you can just use this one It takes a little bit more time to install because of these pieces that cover the upper edges But just take your time and it will come out really nice. These look fantastic – in fact, I get a lot of people asking me where I got them Even at the Apple Store, people have asked me what’s actually on the back of my device So, dbrand is making some really good products, and they’re pretty inexpensive So you can try a couple, if you wanna see something different When you do take them off, it does ruin them because they stretch quite a bit. But they add quite a bit of grip to the back of the phone especially considering it’s pretty slippery aluminum to begin with. And they don’t fit really well in cases So if you’re trying to put this on and then wanna put a case on top you might have some issues with the button distance So it does recede, or make the button recessed a little bit more than it normally is You can feel it, but it’s just a little bit more of a push, especially for the volume buttons. So when you put a case on it, it does affect that a little bit. But other than that, they’re one of my favorite skins. They also make front skins for these as well, if you wanna put that around I prefer to leave it off and either leave this bare or put a screen protector on it. But you can do whatever you want as far as that goes But I really like these. Be sure to check them out. I’ll leave a link to them in the description And they’re – again, they look fantastic. I think you’ll be pretty happy with them if you take your time and put them on nicely. Lemme know what you think in the comments below. If you haven’t subscribed already, please subscribe and like As always, thanks for watching. This is Aaron. I’ll see ya next time.

94 thoughts on “dbrand skins for iPhone 6s Plus Review

  1. dude thank you for posting this video! I need one of these right now it is sooo cool! I cant believe I never heard of this!

  2. I love dbrand… I'm currently using the black Carbon fiber in the center of the back, and white carbon fiber on the top and bottom of the back. Looks great!

  3. I bough a matte white top and bottom with a matte black back do you think it's going to look nice on my black iPhone in person? Because in the picture it did

  4. I have logged into my iclod acc n merge it…n eventually all of my notes are gone…it's showing the previous notes of my old iphone …can u pls tell me how to get back my notes…there were some imp notes…so would so pls help me

  5. Would cutting the button area off and having it come up just slightly under the bumper work for the k11 or is there no way to modify it to work.

  6. Man, how i can select split antenna style like yours. I couldn't find any opinion for 3 skin styles but only front, back and upper &lower.

  7. Is the back all matte black because when I customize it, it shows the whole back of the phone black not like this please respond

  8. I have a question please :do I get all of this if I only buy the BACK coverage option on their website, or should I add the upper/lower coverage ?

    thanks 😉

  9. How hard is this to remove after it's been on the phone for a while?
    Does it leave sticky residue on the phone after you remove it?

  10. Great video! I bought mine 2 days ago so I'll be waiting for it in the mail. I'll be watching this again for reference. thank you!

  11. When i go to the websight, it doesn't show the grey bands around it, it just shows full black, how can i have it with the bands?

  12. Will it affect waterpoofing on Waterproof cases? Please anyone, planning on getting a skin and a waterproof case for my 6 Plus

  13. I got the matte black skin for my gold iPhone 6s Plus. It looks great ! I used the same pieces you used plus the front piece and I love it !

  14. Hello ZOllOTECH i don't have hairdryer, can i put it in the microwave for 3 seconds to get the edges done or with a lighter or heatlamp (soory bad for englliesh)

  15. The ones I see on there website cover the darker lines on the iphone, is this just a problem on the site, or did they change the skins?

  16. I want one, that matte black iphone 6 skin is brilliant bc they didmt offer black iphones (such as jet and matte) till the 7

  17. I know this was published 3 years ago, but just wondering, does this work as a case as well? Like would it protect your phone if you dropped it?

Leave a Reply

Your email address will not be published. Required fields are marked *